Stone fireplaces for sale at George Stone, trusted stone fireplace suppliers.

To clean a stone fireplace surround is easy but it requires some attention.

Here are the steps to keep your fireplace looking its best:

· Step 1: Loose Debris Removal:

Begin by eliminating any loose dirt and debris. Surface can be cleaned by brush or vacuum. This will make you see the stone for what it is and make it ready for further cleaning.

· Step 2: Make a Solution for Cleaning:

Combine a mild cleaning mixture by mixing a quarter cup of dish soap in a quart of warm water. Don’t use harsh chemicals such as bleach or vinegar as it can harm the stone.

· Step 3: Wipe the Stone:

Put on gloves and a mask to avoid dust and cleaning chemicals. Wet a piece of soft cloth or sponge in the soaped water and then squeeze it. Scrub the stone in slightly smaller areas in a circular motion.

· Step 4: Remove Tough Stains:

For the tougher spots, make a paste of baking soda and water. Spread the paste over the stains and wait for 10 минут. Үүний дараа, brush the area with a soft brush.

· Step 5: Rinse and Dry:

Rinse the stone with clean water by using a wet cloth to wipe away the soap. Wipe the stone to dry using a soft clean towel to avoid any water spots. This serves to keep the stone’s look and prevent it from being affected by water.

· Regular Maintenance:

Maintenance is vital for ensuring your stone fireplace surround remains in good condition. Keep on dusting the stone and clean spills immediately to prevent stains. If you want to achieve a deeper cleaning, you should use a stone specific cleaner and make sure to follow the recommended usage directions.

Using these steps, you will keep your stone fireplace clean and beautiful for many years.

Stone installation on a wall with a fireplace can give the room an entirely new look.

Here’s a simple guide to help you through the process:

1. Surface Preparation:

To start with, you should use plastic or drop cloths to cover the space around the hearth. An additional thing you may do if your wall is painted is to mount a metal lath to make the mortar stick. Nail or staple the lath making sure it is very tight to the wall.

2. Scratch Coat Application:

Prepare a type S mortar mix as per the directions. Apply a 1/2-inch thick layer of mortar over the laths using a trowel. Let it stand for around 30 minutes and then brush the surface. This improves the sticking of stones.

3. Set The Stones:

Spread the stones on the ground to visualize their positioning. Combine various sizes, shapes, and colors to make it look natural. Begin with the corner pieces to the inside. This will facilitate the installation as well as improve the appearance.

4. Install the Stones:

Cover the back of each stone with a 1/2-inch layer of mortar. Put the stone hard against the wall, starting from the bottom and moving up. Wriggle slightly in order to achieve good adhesion. Proceed with the task, and spaces of the width of the finger should be left between the stones for the grouting in the future.

5. Use the Grout:

After all stones are positioned and the mortar is dry, load a grout bag with mortar. Squeeze the mortar within the crevices of the stones and ensure they are well packed. Allow the mortar to set a little bit and then rub it with a trowel or a small brush.

6. Clean and Rinse:

Wipe off any leftover mortar from the stone surfaces with a wet cloth before it sets. Let the mortar dry out for a night. After the stones are dry, they may be washed with a mild detergent and water if necessary.

If you follow these steps you will have a lovely stone fireplace wall that will add charm and warmth to your room.

Creating an outdoor stone fireplace is a great way to improve the look of your backyard space and have a great fire place. Here is a guide on how to create one easily:

1. Choosing the Location:

Choose a location in your compound which has proper air circulation and not near any structure that may catch fire. Make sure that your built-in fireplace complies with the laws in your area by consulting the local building codes.

2. Creating a Solid Foundation:

Excavate a hole about 12 inches deep and put a layer of gravel on it. The first step is to pour concrete in order to form a robust foundation to the structure. This foundation will enable it to bear the enormous structure that is to be erected on it.

3. Laying the Stone:

Begin to lay the stones to build the fireplace with the use of mortar. Starting from the bottom and moving upwards, align each stone and ensure that it is well fixed in its position. For the firebox, use firebricks as they can easily withstand high heat.

4. Building the Firebox:

To build the firebox, use firebricks and refractory mortar to ensure that it is strong enough to withstand heat. Make sure it is level to the ground, and level to the building, and plumb to the center. Place a lintel on top of the firebox to provide support to the structure above the opening.

5. Adding the Chimney:

Construct the chimney from the same stones, make sure it is level and perpendicular to the roof. This part makes certain that smoke is efficiently expelled out of the house. You can add chimney length as desired to clear any obstruction on the way.

6. Дуусгах хүрдэл:

After laying the mortar, allow it to dry for 24-48 hours before using the fireplace. This is to ensure that the structure is strong and can bear the required load for use. Have a good time around a new outdoor stone fireplace for parties and warm evenings.

Construction of an outdoor stone fireplace is a great and interesting home improvement project that beautifies the backyard. If done right, a centerpiece can be both aesthetically pleasing and practical within the context of a room’s layout.

• It is an artificial product made of concrete aggregates and other materials and is used to make the cast stone fireplace. It looks like stone, but it is not. It is also worth to mention that cast stone is also lighter in comparison with natural stone and easier to install. It can be molded into any form and comes in various shades.
• Гантиг or granite, for example, is natural stone that is mined from the ground. It has unique patterns and surfaces. Natural stone is much heavier and expensive as compared to cast stone. It also requires much more maintenance; Гэсэн хэдий ч, it has a more authentic and traditional look.

In conclusion, cast stone has low costs and versatility while natural stone has durability and uniqueness.

Table 1: Cast Stone Fireplace vs. Natural Stone Fireplace

Yes you can mount your TV on the stone fireplace but you must plan well and ensure you have the right tools.

• Эхлээд,make sure that the stone fireplace is capable of holding the weight of the TV. Use a stud finder to locate the studs on the back of the stone to ensure proper installation. If there are no studs available then you can use masonry anchors along with a masonry drill bit to drill holes.
• Second,choose the right mount. A swing or full-motion mount is ideal for tilting the display in various directions. Screw the provided anchors through the holes on the mounting bracket into the holes on the stone. Make sure that the bracket is vertically aligned and screwed firmly.
• It is important to consider the heat resistance of the TVsince placing it above a fireplace may cause the TV to overheat. Check the height and the distance for an optimum view.

It is a good idea to try whitening a stone fireplace because it can make the room look a little fresher. Follow these simple steps to achieve a beautiful finish:

Materials Needed:

• White latex paint
• Ус
• Paintbrush
• Used clothes or rags
• Drop cloth
• Painter’s tape

Step-by-Step Process:

1. Талбайг бэлтгэх

• Lay a drop cloth on the floor to protect it from the paint.
• Apply painter’s tape to protect any area that you don’t want to get painted.

2. Clean the Fireplace

• Clean the stone externally with soap and water and let the stone dry. This reduces accumulation of dust and dirt and hence an enhanced paint adhesion is achieved.

3. Combine the Whitewash Solution

• White latex paint is diluted with half bucket of water. Mix well to achieve the required thickness.

4. Apply the Whitewash

• Put the whitewash into the roller tray and proceed to use the roller to paint the stones with the paint.
• Use broad and wide motions to paint the stone.
• To make it look natural, you can use a rag to wipe off the paint.

5. Adjust as Needed

• To achieve a lighter shade, more water should be added. If you want to be more creative you may add more paint.
• You can apply several layers of the paint and allow each layer to dry before applying the next layer.

6. Эцсийн хүрэв

• The last process is to allow the whitewash to dry on the walls completely.
• To remove any droplets or smears, use a damp cloth.

One of the best ways to transform the outlook of your place is by painting your stone fireplace white as this will make your place to look bright and modern.

The cost of the process of setting the stone on a fireplace will depend on the type of stone to be used and the level of difficulty that comes with it. Stone veneer costs vary depending on the type and the extent of the installation; it ranges between $10 болон $25 per sq. ft. The price of natural stones lies between $ 30 болон $ 60 USD per square feet. This covers both material and labor.

Opting for higher quality stones like marble or granite will cause higher costs. Түүнээс гадна, labor costs can go up, if the design of the fireplace is complicated. A professional should be contacted for a precise quote.

Cost of a stone fireplace depends on its design and materials. The price for a basic design can range from $100 руу $500. A more decorative design will cost between 500 болон 2000 per set. The overall cost also varies with the size of the fireplace and the type of stone you select.

Labor costs also influence. A professional installer can increase the total cost. DIY saves money but can be difficult. Explore other stone fireplace designs to find out which suits your pocket and your style. Stone fireplaces can complement your home’s appearance whether you opt for a plain or ornate design.

Mantel installation on stone fireplace is almost a short procedure.

• Эхлээд,gather your materials: mantle shelf, brackets, screws, drill, and level.
• Prepare the Wall:Polish the stone to smooth, clean surface. Make sure it is clean from dust and dirt. This will make the brackets to stick better.

• Install Mounting Brackets:Measure and pencil where you desire the mantel. Fix the mounting brackets to the stone by the use of masonry screws or anchors. Check that they are safe by pulling them lightly.

• Mount the Mantel:With the assistance of a friend, install the mantel onto the brackets. Level it to ensure it is straight. Mark the place where the brackets hit the mantel.
• Secure the Mantel:Unfix the mantle and pre-drill holes at points marked. Return the mantel onto the brackets and screw it in. Tighten screws but not too much to prevent damaging.
• Эцсийн хүрэв:Verify the stability with a light shake. If it is safe, clean the mantle and arrange it however you want.

This system guarantees a safe and attractive mantel installation on your stone fireside.

The standard stone fireplace is 36-48 inches in width, 20-30 inches in height and 16-24 inches in depth.

• The usual sizes for masonry fireplaces are 36-48 inches wide, 36-42 инч өндөр ба 20-24 inches deep.
• The width of a gas fireplace generally ranges from 36 руу 48 inches, its height from 30 руу 40 inches, and its depth which depends on the specific model.
• Зуухны эргэн тойрон are the decorative frameworks and are usually 48-60 inches in width and 40-52 inches in height.
• Corner fireplaces that have been designed to be placed in room corners usually have a width of 40-45 inches and a height of 30-40 inches.

With these standard dimensions, the installation planning is made easy and the fireplace will fit into the room’s space perfectly. Select the stone fireplace according to the size of the room and the design style.

To get rid of water spots and soot on a stone fireplace you require some simple everyday items.

• Start with warm water, a mild detergent, and a soft scrub brush. In case of heavy stains, use trisodium phosphate (TSP)or oxygen bleach.
• Prepare the area:Spread drop cloths under the fireplace to avoid the floor from being stained.
• Mix a cleaning solution:In a bucket, mix one gallon of warm water, 1/4 cup of dish soap, болон 1 cup of oxygen bleach. This remedy is efficient and stone friendly.
• Scrub the stone:Using the scrub brush, dip into the solution and scrub the stone in small circular motions. Spot treat the stained areas, reapplying the solution as necessary.
• Rinse and dry:Rinse the brush and the bucket, then fill with fresh water. Use a cleaner rag that has been saturated in this water to wipe the stone down, removing any soapy residue. At last, dry the rock using a clean towel.
• For difficult stains, a creamy mixture of TSP and water can be used. Use this solution on the stains, leave it for five minutes, and then scrub and rinse as usual.

When you are using TSP or bleach, don’t forget to put on gloves and have a good ventilation. This approach keeps your stone fireplace looking neat and well-cared.

• A stone fireplace with a wood mantelis a traditional sight. It makes your room feel cozy and rustic. It is possible to use a genuine wood, and it is a traditional option. The wood mantel is right for hanging stockings and decor. Гэсэн хэдий ч, it requires cleanliness and care to remain safe and attractive.
• Нөгөө талаар, an electric stone fireplaceis a modern day convenience. It is simple to place, and low maintenance is required. The heat and flames could be controlled with a remote. It also gives a safer alternative, particularly for homes with kids. Түүнээс гадна, you need not make an effort in chopping or buying wood.

To summarize, a stone fireplace and a wooden mantel make a classic and appropriate look. It needs more upkeep. An electrical stone fireplace is a flexible, safe and contemporary. The disadvantage of it is that it does not have the beauty of real wood and fire. Select depending on your fashion and security requirements. Consider your maintenance preference. Each option has its advantages. Choose the one that suits you and your home decor best.

Table 2: Stone Fireplace with Wood Mantle vs. Electric Stone Fireplace

If you want to get the best sealer for your stone fireplace, consider some of the top options in terms of effectiveness and application convenience.

• Miracle Sealants 511 Impregnator Sealeris one of the best sealers. It improves the color of the stone in natural and has a powerful stain resistance. This sealer is suitable for indoor as well as outdoor and has a longevity of 3-5 жил.
• Another equally good one is Granite Gold Sealer Spray. It is water-based and non-hazardous, therefore, it is appropriate for kitchen surfaces. This sealer is easy to apply: Spray it on, let it sit for 20 minutes and then wipe off. It is perfect in keeping the appearance of your stone fireplace.
• Stone Pro Pro Sealeris a more heavy-duty alternative. This deep impregnating sealer offers lasting stain protection without changing the stone’s look. It is suitable for many natural stones such as marble and granite and is VOC compliant.

These sealers will also help maintain a great look of your stone fireplace which will stay protected from various stains and damages.

The construction of the stone fireplace and chimney is an expensive venture. The average price varies from $10,000 руу $20,000. For a simple masonry fireplace, the cost begins at $10,000. This involves the cost of a new building including the material and labor. In adding a stone fireplace to a home already built, the cost can go up substantially. Supplementary repairs may be necessary bringing the total to around $17,000.

The type of materials that are used, such as natural stone or artificial stone, will also determine the price. Natural stone is costly but gives better heat retention. Гэсэн хэдий ч, synthetic stone can lead to saving the cost up to 25%. Keep in mind that these are costs on average and the actual prices can then differ depending on your location and specific project requirements.

For those looking to purchase stone fireplace hearth stones, Жорж Стоун is a reliable supplier. There is a huge assortment of hearth stones that you can use in your stone fireplace ideas. They come in a variety of styles which include modern and rustic stone fireplaces. George Stone has a reputation for top-quality products and superior customer service. Please, feel free to get in touch with us if you would like to have more information, as well as to see the variety that we offer.